mPower Electronics Inc.

Making Powerful Senses

POLI Multi-Gas DetectorsPOLI Multi-Gas Detectors

Professional gas detection and alarm systems

The POLI multi-gas detectors (MP400/MP400P/MP400S) offer 4- or 5-gas monitoring of oxygen (O2), combustibles (LEL), toxic gases, carbon dioxide (CO2), and volatile organic compounds (VOCs). The MP400 and MP400P are basic models with O2, LEL, carbon monoxide (CO) and hydrogen sulfide (H2S) configuration in both diffusion or pumped versions, for confined space entry compliance. The MP400S adopts a full range of sensor selection, e.g. electrochemical (EC), pellistor, non-dispersive infrared (NDIR) and photo-ionization detector (PID) in a pumped model. Use of a combined CO/H2S sensor in the MP400S allows up to five gases to be monitored. An option of wireless communication enables real-time monitoring of gas readings and alarm status including man down alarm from remote locations for better visibility and faster response.

Get a Quote

Product Features
  • Available in diffusion or pump version
  • Man Down Alarm with real-time remote wireless notification
  • IP-65/67 water and dust resistant case
  • Real-time gas concentration readings and alarm status enabled by state-of-the-art wireless technology
  • Large graphical display icon-driven user interface through intuitive, simple-to-operate two-button user interface
  • Easy access to pump, sensor, filter and battery
  • Over 30 interchangeable sensor options, including PID for VOC, NDIR and catalytic for combustibles, and NDIR for CO2
  • Intelligent sensors store calibration data, so they can be swapped in the field
Certifications
Downloads
Applications

Confined space entry and general safety compliance in:

Multi-gas leak detection in industries such as chemical, food and beverage, oil and gas (downstream)

*** Available to ship in first quarter of 2019

Detector Specifications
Size 5.74 x 3.31 x 1.65 in (140 x 84 x 42 mm)
Weight 14 oz (400 g)
Sensor Over 30 interchangeable and field-replaceable sensors including PID for VOCs, EC for Toxic and O2, Pellistor for LEL, and NDIR for LEL and CO2
Battery Rechargeable Li-ion pack:18 hours in diffusion with no wireless, 16 hours in diffusion with wireless, 12 hours in pump with no wireless, and 10 hours in pump with wireless
Direct Readout Real-time reading of gas concentration, PID measurement gas and correction factor, Man Down Alarm on/ off, individual compliance indicator, battery status, datalogging on/off, wireless on/off and reception quality STEL, TWA, peak and minimum values
Display 128 x 128 graphical LCD, 1.77 x 1.73 in (45 x 44 mm), with LED backlight for enhanced display readability. Automatic screen “flip” feature.
Keypad 2 operation keys
Sampling Bulit-in pump or diffusion
Calibration Manual or automatic bump test and calibration with CaliCase (separate orders)
Alarm Wireless remote alarm notification, audible (90dB@750px), vibration, visual (flashing bright red LEDs), and on-screen indication of alarm conditions Man Down Alarm with pre-alarm and real-time remote wireless notification
Datalogging Continuous datalogging (6 months for 4 sensors at 1 minute intervals, 24 hours a day and 7 days a week)
Charging and Communication Charging, data download, instrument setup and firmware upgrades on PC or laptop via PC comm, cradle, travel charger, or CaliCase Wireless data and alarm status transmission via built-in RF modem (optional)
Temperature -4° to 122°F (-20°C to 50°C)
Humidity 0% to 95% relative humidity (non-condensing)
IP Rating IP-65 (pump); IP-67 (diffusion)
Safety Certifications UL/cUL: Class I, Div 1, Group A, B, C, D
T4, -20°C ≤ Tamb ≤ +50°C (pending)
EMC/RFI
EMC directive: 2004/108/EC
Warranty 2-year including most sensors
Sensor Options
Sensor Range Resolutions
PID 0-1000ppm 0.1ppm
Oxygen (O2) 0-30%Vol 0.1%Vol
Combustible (LEL) 0-100%LEL 1%LEL
Carbon Monoxide (CO) 0-1000ppm 1ppm
Hydrogen Sulfide (H2S) 0-100ppm 0.1ppm
Ethylene Oxide (ETO) 0-100ppm 0.1ppm
Hydrogen Fluoride (HF) 0-10ppm 0.1ppm
Nitric Oxide (NO) 0-250ppm 1ppm
Methanethiol (CH3SH) 0-10ppm 0.1ppm
Sulfur Dioxide (SO2) 0-20ppm 0.1ppm
Hydrogen Cyanide (HCN) 0-100ppm 1ppm
Ammonia (NH3) 0-50ppm 1ppm
Phosphine (PH3) 0-5ppm 0.01ppm
Chlorine (Cl2) 0-10ppm 0.1ppm
Nitrogen Dioxide (NO2) 0-20ppm 0.1ppm
Hydrogen Chloride (HCl) 0-15ppm 0.1ppm
Chlorine Dioxide (ClO2) 0-1ppm 0.01ppm
Acetaldehyde (C2H4O) 0-20ppm 0.1ppm
Combustible (Vol%) 0-100%Vol 0.1%Vol
Carbon Dioxide (CO2) 0-50000ppm 100ppm
CO+H2S CO: 0-500ppm
H2S: 0-200ppm		 CO: 1ppm
H2S: 0.1ppm

mPower Electronics Inc.

UNI Ozone Monitors Used in Corona Virus Disinfection

Currently there is much interest in using UV and ozone generators to kill the SARS-CoV-2 virus that causes COVID-19 disease. Hospitals and businesses are treating entire patient rooms, offices, and other workspaces during off hours while no one is permitted to enter the rooms. During ozone treatment, concentrations over 20 ppm are recommended by generator manufacturers for adequate disinfection. UV light kills viruses directly, but may generate some ozone as a by-product. Workers using batch equipment sterilizers, where several thousand ppm of ozone may be applied, also need protection. Ozone is highly toxic to humans, and therefore UNI ozone monitors are being employed to ensure that residual ozone has decomposed or ventilated before employees can re-enter the workspace safely. Ozone has an 8-hour TWA exposure limit of about 0.07 ppm in many countries including most of Europe. In the US, the ACGIH makes the following 8-hour TWA recommendations:

  • 0.05 ppm for heavy work
  • 0.08 ppm for moderate work
  • 0.10 ppm for light work
  • no more than 0.20 ppm for any 2 continuous hours.

The UNI Ozone monitor has a resolution of 0.01 ppm and can measure up to 5 ppm ozone with a response time of 60 seconds, making this small, low-cost unit convenient and accurate for protection of the workforce.

23 April 2020

mPower Electronics Inc.

mPower Electronics' Updates on CoVid-19

In order to meet urgent needs for public health and worker safety, our dedicated staff continues processing purchase orders as essential tasks, and makes timely shipments from our offices in Pasadena, TX and Santa Clara, CA. The state governments of California and Texas have ordered citizens to stay at home in a bid to contain the coronavirus outbreak. While these two offices are locked down during normal business hours, we will accommodate critical pickups if advanced arrangements are agreed in compliance with the pandemic gather rules.

In addition, our Shanghai factory has been shipping orders globally since the 1st week of February 2020, and has been running at a full capacity since early March.

We are very grateful to our loyal customers for giving us business, and would like to thank our employees for keeping it going in such a severe pandemic period.

Let us stay safe, healthy and strong!

mPower Electronics Team