mPower Electronics Inc.

Making Powerful Senses

NEO Photo-ionization DetectorsNEO Photo-ionization Detectors

Professional gas detection and alarm systems

The NEO is one of the most advanced handheld VOC (Volatile Organic Compound) monitors available for ppb (parts per billion) detection. The NEO offers several models from the most sensitive 1 ppb to a high range up to 15,000 ppm for different applications and a benzene-specific version (NEO BENZ)*. A novel design of Photo-ionization Detector (PID) and Ultraviolet (UV) lamp reduces interferences due to humidity. Options include real-time data monitoring with a built-in wireless modem using mPower Suite application software.

Get a Quote

 
Product Features
  • Size: 9.06 x 3.15 x 2.36 in (230 x 80 x 60 mm), Weight: 25 oz (700 g)
  • 1 ppb to 15,000 ppm ranges of VOC
  • Benzene-specific measurement version 0.05 to 200 ppm benzene (NEO BENZ)*
  • 3-second response time
  • Large and intuitive display
  • Integrated Correction Factor list of more than 200 compounds
  • Built-in pump for up to 30 meters sampling distance
  • Man-Down alarm with real-time remote wireless notification
  • ISM wireless connection option
  • Easy service and maintenance
  • Micro-USB charge port

*** Coming soon

Certifications
Downloads
Applications
Detector Specifications
Size9.06 x 3.15 x 2.36 in (230 x 80 x 60 mm)
Weight24.69 oz (700 g)
SensorPhoto-ionization sensor with standard 10.6 eV lamp (9.8 eV lamp in MP186)*
Response Time t903 seconds
Accuracy±3% (at calibration point)
Battery / Run TimeRechargeable Lithium-Ion battery with 24 hours typical operation
Keypad4 operation keys
Sampling pumpBuilt-in pump @ 450 cc/min, settable to low flow of 250 cc/min
Sample from up to 100 ft (30 m) horizontally or vertically
Display128 x 128 graphical LCD, 1.77 x 1.73 in (45 x 44 mm), with LED backlight for enhanced display readability
Direct ReadoutReal-time reading of gas concentration (ppb, ppm, mg/m3, μg/m3)
PID measurement gas and correction factor, lamp on/off, Man-Down alarm on/ off, battery status, pump status, datalogging on/off, wireless on/off, temperature and time
AlarmAudible (90 dB @ 30 cm), visual (flashing bright red LEDs), and on-screen indication of alarm conditions plus wireless remote alarm notification
High, Low, STEL, TWA alarms
Over range alarm, battery low alarm
Man-Down alarm with pre-alarm and real-time remote wireless notification
EMI/RFIHighly resistant to EMI/RFI
Compliant with EMC Directive 89/336/EEC
IP RatingP-66/67
DataloggingStandard 12 months at one-minute intervals
Storage interval: 1 to 3,600 seconds (adjustable)
CalibrationTwo/three-point calibration
Charging and CommunicationCharging, data download, instrument setup and firmware upgrades on PC or laptop via Micro USB
Wireless data and alarm status transmission via built-in RF modem
Wireless Range1,000 ft (300 m) typical
Correction FactorsIntegrated Correction Factor list of more than 200 compounds
Safety Certifications1000 ft or 300 m typical
Safety CertifcationsUL/cUL: Class I, Div 1, Group A, B, C, D
T4, -20°C ≤ Tamb ≤ +50°C (pending)
Temperature-4° to 113°F (-20°C to 50°C)
Humidity0% to 95% relative humidity (non-condensing)
AttachmentsDurable rubber boot, color coded for different models; Tube holder for MP186
Warranty2-year warranty including lamp and sensor
Model Numbers
Model NumbersVOC Range (ppm)Resolution (ppb)
MP181 (NEO PPM)500010
MP182 (NEO EXT)1500010
MP184 (NEO PPB)150001
MP185 (NEO SEMI) (w/o MicroUSB)150001
MP186 (NEO BENZ)*
(w/9.8 eV Lamp & Tube Holder)		200 Benzene50
10,000 VOC*5

** Coming soon. 9.8 eV lamp detects fewer VOCs than 10.6 eV lamp

* Due to ongoing research and product improvement, specifications are subject to change without notice.

UNI Ozone Monitors Used in Corona Virus Disinfection

Currently there is much interest in using UV and ozone generators to kill the SARS-CoV-2 virus that causes COVID-19 disease. Hospitals and businesses are treating entire patient rooms, offices, and other workspaces during off hours while no one is permitted to enter the rooms. During ozone treatment, concentrations over 20 ppm are recommended by generator manufacturers for adequate disinfection. UV light kills viruses directly, but may generate some ozone as a by-product. Workers using batch equipment sterilizers, where several thousand ppm of ozone may be applied, also need protection. Ozone is highly toxic to humans, and therefore UNI ozone monitors are being employed to ensure that residual ozone has decomposed or ventilated before employees can re-enter the workspace safely. Ozone has an 8-hour TWA exposure limit of about 0.07 ppm in many countries including most of Europe. In the US, the ACGIH makes the following 8-hour TWA recommendations:
• 0.05 ppm for heavy work
• 0.08 ppm for moderate work
• 0.10 ppm for light work
• no more than 0.20 ppm for any 2 continuous hours.
The UNI Ozone monitor has a resolution of 0.01 ppm and can measure up to 5 ppm ozone with a response time of 60 seconds, making this small, low-cost unit convenient and accurate for protection of the workforce.

23 April 2020

mPower Electronics Inc.

mPower Electronics' Updates on CoVid-19

In order to meet urgent needs for public health and worker safety, our dedicated staff continues processing purchase orders as essential tasks, and makes timely shipments from our offices in Pasadena, TX and Santa Clara, CA. The state governments of California and Texas have ordered citizens to stay at home in a bid to contain the coronavirus outbreak. While these two offices are locked down during normal business hours, we will accommodate critical pickups if advanced arrangements are agreed in compliance with the pandemic gather rules.

In addition, our Shanghai factory has been shipping orders globally since the 1st week of February 2020, and has been running at a full capacity since early March.

We are very grateful to our loyal customers for giving us business, and would like to thank our employees for keeping it going in such a severe pandemic period.

Let us stay safe, healthy and strong!

mPower Electronics Team