mPower Electronics Inc.

Making Powerful Senses

Terms and Conditions of Use

Terms

By accessing this website, you are agreeing to be bound by these website Terms and Conditions of Use, all applicable laws and regulations, and agree that you are responsible for compliance with any applicable local laws. If you do not agree with any of these terms, you are prohibited from using or accessing this site. The materials contained in this website are protected by applicable copyright and trademark law.

Use License

Permission is granted to temporarily download one copy of the materials (information or software) on mPower Electronics Inc.’s website for personal, non-commercial transitory viewing only. This is the grant of a license, not a transfer of title, and under this license you may not:

  1. modify or copy the materials;
  2. use the materials for any commercial purpose, or for any public display (commercial or non-commercial);
  3. attempt to decompile or reverse engineer any software contained on mPower Electronics Inc.’s website;
  4. remove any copyright or other proprietary notations from the materials; or
  5. transfer the materials to another person or “mirror” the materials on any other server.

This license shall automatically terminate if you violate any of these restrictions and may be terminated by mPower Electronics Inc. at any time. Upon terminating your viewing of these materials or upon the termination of this license, you must destroy any downloaded materials in your possession whether in electronic or printed format.

Disclaimer

The materials on mPower Electronics Inc.’s website are provided “as is.” mPower Electronics Inc. makes no warranties, expressed or implied, and hereby disclaims and negates all other warranties, including without limitation, implied warranties or conditions of merchantability, fitness for a particular purpose, or non-infringement of intellectual property or other violation of rights. Further, mPower Electronics Inc. does not warrant or make any representations concerning the accuracy, likely results, or reliability of the use of the materials on its Internet website or otherwise relating to such materials or on any sites linked to this site.

Limitations

In no event shall mPower Electronics Inc. or its suppliers be liable for any damages (including, without limitation, damages for loss of data or profit, or due to business interruption,) arising out of the use or inability to use the materials on mPower Electronics Inc.’s Internet site, even if mPower Electronics Inc. or an mPower Electronics Inc. authorized representative has been notified orally or in writing of the possibility of such damage. Because some jurisdictions do not allow limitations on implied warranties, or limitations of liability for consequential or incidental damages, these limitations may not apply to you.

Revisions and Errata

The materials appearing on mPower Electronics Inc.’s website could include technical, typographical or photographic errors. mPower Electronics Inc. makes every effort to ensure accuracy on its website but does not warrant that materials on its website are accurate, complete or current. mPower Electronics Inc. may make changes to the materials contained on its website at any time without notice. mPower Electronics Inc. does not, however, make any commitment to update the materials.

Links

mPower Electronics Inc. has not reviewed all of the sites linked to its Internet website and is not responsible for the contents of any such linked site. The inclusion of any link does not imply endorsement by mPower Electronics Inc. of the site. Use of any such linked website is at the user’s own risk.

Site Terms of Use Modifications

mPower Electronics Inc. may revise these terms of use for its website at any time without notice. By using this website, you are agreeing to be bound by the then current version of these Terms and Conditions of Use.

Governing Law

Any claim relating to mPower Electronics Inc.’s website shall be governed by the laws of the State of California without regard to its conflict of law provisions.

General Terms and Conditions applicable to Use of a Website.

 

Posted January 30, 2019

mPower Electronics Inc.

UNI Ozone Monitors Used in Corona Virus Disinfection

Currently there is much interest in using UV and ozone generators to kill the SARS-CoV-2 virus that causes COVID-19 disease. Hospitals and businesses are treating entire patient rooms, offices, and other workspaces during off hours while no one is permitted to enter the rooms. During ozone treatment, concentrations over 20 ppm are recommended by generator manufacturers for adequate disinfection. UV light kills viruses directly, but may generate some ozone as a by-product. Workers using batch equipment sterilizers, where several thousand ppm of ozone may be applied, also need protection. Ozone is highly toxic to humans, and therefore UNI ozone monitors are being employed to ensure that residual ozone has decomposed or ventilated before employees can re-enter the workspace safely. Ozone has an 8-hour TWA exposure limit of about 0.07 ppm in many countries including most of Europe. In the US, the ACGIH makes the following 8-hour TWA recommendations:

  • 0.05 ppm for heavy work
  • 0.08 ppm for moderate work
  • 0.10 ppm for light work
  • no more than 0.20 ppm for any 2 continuous hours.

The UNI Ozone monitor has a resolution of 0.01 ppm and can measure up to 5 ppm ozone with a response time of 60 seconds, making this small, low-cost unit convenient and accurate for protection of the workforce.

23 April 2020

mPower Electronics Inc.

mPower Electronics' Updates on CoVid-19

In order to meet urgent needs for public health and worker safety, our dedicated staff continues processing purchase orders as essential tasks, and makes timely shipments from our offices in Pasadena, TX and Santa Clara, CA. The state governments of California and Texas have ordered citizens to stay at home in a bid to contain the coronavirus outbreak. While these two offices are locked down during normal business hours, we will accommodate critical pickups if advanced arrangements are agreed in compliance with the pandemic gather rules.

In addition, our Shanghai factory has been shipping orders globally since the 1st week of February 2020, and has been running at a full capacity since early March.

We are very grateful to our loyal customers for giving us business, and would like to thank our employees for keeping it going in such a severe pandemic period.

Let us stay safe, healthy and strong!

mPower Electronics Team